Intermediate
How to reset a VPS password on Contabo
Quick Answer
The fastest way is using the Customer Control Panel: log in, select your VPS, choose Password reset, enter new password, and confirm reboot. For manual control or Windows, activate Rescue Mode, SSH in, mount partition, and reset via commands. Verify by SSH login with new credentials.
Prerequisites
- Access to Contabo Customer Control Panel
- SSH client for Rescue Mode
- Basic command-line knowledge
- VNC/RDP client for Windows
- Network connectivity
1
Log in to Customer Control Panel
Access the Contabo Customer Control Panel (CCP) using your customer credentials to begin the password reset process[5][1].
2
Navigate to VPS Control
Go to Your Services or select VPS control from the left menu, then locate your server and click Manage or More[5][3].
Tip
Choose Server control for dedicated, VDS control for virtual dedicated servers[5].
3
Select Password Reset (CCP Method)
From the dropdown, click Password reset or Reset Credentials, enter your new password, confirm it, and optionally use Generate for a secure one[5][2]. Check the confirmation box that you saved the password, then click Perform password reset twice to initiate reboot[2][1].
Tip
Server reboots automatically; new password active in minutes[3].
4
Activate Rescue Mode (Alternative)
If CCP fails or for manual reset, hover over Manage > Control, select Rescue System (default Debian), generate and save temp credentials, then reboot server[4][1].
Tip
Use for advanced control or Windows servers[3].
5
Connect via SSH in Rescue Mode
ssh root@<your_server_ip>6
Mount System Partition (Linux)
Identify partition with
lsblk, then mount (e.g., mount /dev/sda1 /mnt) and reset root password using chroot /mnt passwd or standard Linux commands[6][3].Tip
Typically /dev/sda1 for Linux[6].
7
Reset Windows Password (Rescue Mode)
Repair/mount Windows partition:
ntfsfix /dev/sda2 then mount -t ntfs-3g /dev/sda2 /mnt. Run chntpw -u Administrator /mnt/Windows/System32/config/SAM, select 1 to clear password, unlock with 2, quit with q and save y[1][4].Tip
Decrypt BitLocker first if enabled[1].
8
Exit Rescue and Reboot
Exit Rescue Mode in CCP, reboot to normal system. For Windows, connect via VNC immediately to set new password, then use RDP[1][4].
Tip
Mandatory for Windows after SAM edit[1].
9
Verify New Password
ssh root@<your_server_ip>Troubleshooting
CCP Password Reset Not Working or Timing Out
Wait 5-10 minutes for reboot, clear browser cache, try different browser/device, or contact Contabo Support[4].
Cannot SSH After Reset (Linux)
Wait 2-3 minutes for full reboot, confirm root username and exact password, check server status[4][5].
Mounting Fails in Rescue Mode
Verify partition with
lsblk, run ntfsfix for Windows, ensure correct device like /dev/sda1 or /dev/sda2[1][4].Windows Password Not Cleared
Confirm Administrator username, use chntpw options 1 (clear) and 2 (unlock), set new password via VNC/RDP immediately[1][4].
BitLocker Blocks Access
Decrypt disk before Rescue Mode; required for Windows encrypted partitions[1].
Ready to get started with Contabo?
Put this tutorial into practice. Visit Contabo and follow the steps above.
Visit Contabo →